High Voltage Substation Lightning Arresters Manufacturers of 66kv Surge Arrester

Basic Info

Model NO.	Y10W5-66
Application	Electronic Equipment
Material	Porcelain, Ceramic
Certification	Kema Test Report
Standard	IEC60099-4
Keyword	66kv Surge Arrester
Rated Voltage	66kv
Delivery Time	25 Days
Accessory	Bracket,Insulating Cap,Cooper Lead,Insulator,Hoop
Nominal Current	10ka
Color	Gray, Brown
Transport Package	Wooden Case for High Voltage Substation
Trademark	YONGDE
Origin	Zhejiang, China (Mainland)
HS Code	853310000
Production Capacity	35000 Piece/Pieces Per Month

Product Description

High Voltage Substation Lightning Arresters Manufacturers of 66kV Surge Arrester

0.25kV~750kV Surge Arresters' Characteristics:
1. The Core column applied winding structure, Polymer Housed core pillar molded on the core column, with almost no internal air gap, and outstanding sealing performance Simple in structure, small in size and light in weight.
2. Polymer Housed with silicone rubber, explosion-proof ZnO varistor as the core component is large
in flow capacity.
3. International standard IEC 60099-4 and ANSI 62.22, and with high reliability. With fully insulated tops, the product can be applied to the complete cabinet installation, which can reduce the designing size of cabinet.
4. Products with detachment device can provide signals for quitting operation when failure occurs,
avoiding arrester explosion, and it is maintenance-free.
5. Polymer housed products with a six CTI level, creepage distance meets the requirements of IV level in heavy pollution areas.

Surge Arresters' Technical Parameters:

Type	Y10W5-66/176
Rated voltage---------kV	66
MCOV ----------------kV	52.8
Nominal Current-------kA	10
Residual voltage of steep impulse----at 5kA(kV)	221
8/20μS Residual voltage of lightning impulse current kV(Peak value)-----at 5kA(kV)	178
Residual voltage of switching impulse current kV (peak value)----at 1kA (kV)	137
1mA D.C reference voltage (kV)	96
Line discharge level	1
2mS long duration impulse current A	400
4/10μS High current impulse kA	100
Lightning impulse withstand kV	325
Power frequency voltage withstand(dry/wet)kV	140
0.1S TOV--------------kV	79.2
1S TOV----------------kV	75.9
10S TOV---------------kV	72.6
1200S TOV-------------kV	66
Creepage distance ----mm	2500
Material employed in series non-linear resistor	Zinc Oxide

Working condition:	Environment temperature: -40--+40 degree
	altitude:<1000m
	48HZ<Rated frequency<62HZ
	Power frequency voltage should not be more than continuous running voltage
	Max wind speed should be less than 35m/s
	Earthquake intensity should be less than 7 degree
	If used in contamination area, should be noted in advance.

Lightning Arresters Production: